Get a free quoteCall 0415 525 982

Mon to Fri, 7am to 4pm. Wollongbar NSW 2477.

Dark ribbed metal roof with scaffold edge protection looking out over green hinterland towards the coast

Colorbond® & metal roofing in the Northern Rivers

Ricky Jenner Roofing installs Colorbond and metal roofs on new builds and re-roofs across the Northern Rivers, from our Wollongbar base.

  • Licensed since 2009Ricky's NSW licence 219172C
  • Scaffold, every jobEdge protection goes up first
  • 23+ yearsOf trade experience for Ricky
  • Free quotesItemised, after an on-site look
Dark corrugated metal re-roof with scaffold edge protection and a multi-storey building behind
Illustrative: foil-faced insulation blanket being rolled out over battens beside new corrugated roof sheets
New clip-lock roof sheets laid out across the old roof during a Ballina re-roof

Metal roofing, Northern Rivers

Colorbond roofing, fitted by a licensed roof plumber

Ricky Jenner Roofing installs new Colorbond roofing and other metal roofs on homes and new builds across the Northern Rivers. Ricky has held his NSW roof plumber licence since 2009, so the sheets, the flashings and roof plumbing and matching Colorbond gutters are all done by one crew.

From Wollongbar we roof homes on the plateau, the coast and in the hinterland, including Alstonville and Wollongbar, metal roofing in Ballina, Lismore and Byron Bay, and recent metal roofs are on the Our Work page. If you are replacing an existing roof or converting from tiles, those pages cover the extra steps, and sheds and shops are on commercial and shed roofing. Planning a budget? Start with what a Colorbond roof costs and the pros and cons of metal roofing.

  • Scaffold and edge protection on every job
  • Battens, insulation blanket and sarking under the sheets
  • A free, itemised quote after an on-site look

Corrugated, ribbed or concealed-fix

The profile is the shape of the sheet. It sets the look, the lowest pitch the roof can run at and how the sheets are fixed.

Pitches are manufacturers' published minimums and vary with sheet thickness, so we confirm yours at the quote. Read metal roof profiles explained, how to choose a Colorbond colour and insulation under a metal roof.

  • Light grey corrugated roof with hip and valley cappings, two whirlybirds and a vent pipe flashing above a timber verandah

    Minimum roof pitch: From about 5° pitch

    Corrugated

    The classic ripple, at home on Queenslanders, farmhouses and brick homes. Rated down to about 5 degrees, it suits most pitched homes and tile conversions.

  • Completed dark grey ribbed metal roof with neat hip cappings where several roof planes meet on a hillside home

    Minimum roof pitch: From about 2° pitch

    Trapezoidal rib

    Taller, squarer ribs give a crisper line and carry more water on low pitches. We fitted Colorbond Trimdek on a new build at Skennars Head.

  • Truck delivering long clip-lock roof sheets along a residential street

    Minimum roof pitch: From 1° to 2° pitch

    Concealed-fix clip-lock

    Sheets clip onto brackets, so no screws go through the top. Long sheets suit low-pitch and skillion roofs, like these 25 metre sheets.

Near the coast, the steel depends on the surf

Salt spray is the biggest threat to a metal roof in Ballina, Lennox Head and Byron Bay. BlueScope bases its advice on the distance from breaking surf, measured from the high-water mark, so a home on a calm river or estuary is judged on its distance from the surf beach.

BlueScope recommendation by distance from breaking surf, from its roofing selection guide (TB-1A), checked September 2026. Read Colorbond Ultra for coastal homes, Zincalume vs Colorbond and how long a Colorbond roof lasts.

Metal roofing questions

Straight answers on profiles, coastal steel, colours and cost. Anything else, just call.

How long does a Colorbond roof last?

BlueScope doesn't publish a single lifespan, because it depends on where the roof is. Its warranties vary with the product, how it is used and the site's distance from the coast, and eligibility criteria apply. The biggest factors you control are the right steel for your distance from the surf, compatible fixings, and hosing down areas that rain doesn't wash.

What are the main types of metal roofing profiles?

There are three main families. Corrugated is the classic ripple and suits most pitched homes. Trapezoidal rib profiles have taller, squarer ribs and can run at lower pitches. Concealed-fix profiles clip onto brackets with no screws through the top of the sheet and suit low-pitch and skillion roofs. The right choice depends on your pitch, the look you want and the exposure.

How do you avoid the common problems with metal roofs?

The usual complaints are rain noise, condensation and corrosion near the coast, and each has a fix. An insulation blanket under the sheets dulls rain and reduces condensation. Steel rated for your distance from breaking surf, with compatible fixings, deals with corrosion. Many metal roof problems come from the wrong product for the site or poor flashing work rather than the steel itself.

Is metal roofing suitable for coastal homes?

Yes, with the right steel. BlueScope recommends standard Colorbond steel for roofs more than 200 metres from breaking surf and Colorbond Ultra steel between 100 and 200 metres, measured from the high-water mark. Closer than that, it recommends stainless steel roofing and site-specific advice. Fixings and flashings need to be compatible with the sheet and the exposure too.

Can I choose any Colorbond colour?

Yes. We install the full Colorbond range, and gutters and flashings can be matched to the roof. Lighter colours reflect more of the sun, and some estates and strata schemes have colour rules, so check yours before you decide. Screens and printed charts are only a guide, so look at a physical sample in daylight before you choose.

How long does a Colorbond roof installation take?

It depends on the size and pitch of the roof, how much of the old roof and battens have to come off, access for scaffold and the weather. A simple new-build roof is quicker than a steep re-roof with hips and valleys. We talk through the likely timing when we quote, and we keep you posted if rain moves the dates.

Do you roof new builds for builders?

Yes. We roof new homes for builders and owner-builders across the Northern Rivers, including battens, insulation blanket, sheets, flashings, gutters and downpipes. Send the plans and your frame date with your quote request so we can price and book the roof. Scaffold and edge protection go up before anyone works at the roof edge.

What does a Colorbond roof cost for a 3 bedroom house?

There is no honest single figure, because two three-bedroom homes can have very different roofs. The price depends on roof area and pitch, the number of hips and valleys, the profile and steel grade, removing any old roof, batten and insulation work, and access and scaffold. We measure the roof and give you a free, itemised written quote.

Illustrative: a roofer in a lime hi-vis shirt points out the gutter line of a brick home's metal roof to the homeowner

Get a free, itemised quote

Tell us where the house is, what is on the roof now and what you have in mind. We quote after an on-site look, Monday to Friday, 7am to 4pm.

What do you need help with?
Your details

Fields marked with an asterisk are required.

Enter your first name

Enter your last name

Enter a phone number

Enter your email address

Enter the suburb or town where the job is

See our privacy policy for how we handle your details.

Call 0415 525 982Get a free quote